Wireless Remote Sensor Pad Alarm Systems

AliMed Wireless Remote Sensor Pad Alarm System Our newest Sensor Pad Alarm System has incorporated all of the features of our previous bed sensor pad systems plus additional functions, including a wireless alarm unit and a programmable hold button on the patient alarm unit.

Wireless Remote Alarm Unit Traditional sensor pad alarms sound only at the bedside, making it a challenge for staff to quickly locate the patient in need. Bedside patient alarm units are also often upsetting to patients and can interfere with their sleep and that of their roommates. With the wireless remote alarm option, the alarm can sound at the bedside and outside of the room simultaneously, or sound and flash outside of the room only. This makes it easier for staff to locate the patient quickly and helps reduce the incidence of patient tampering with the alarm.

Programmable Hold Button allows staff to place the alarm unit in a temporary hold mode while assisting the patient. While alarm is on hold, the patient can move off the pad without the alarm sounding. Once the hold period expires, the system automatically resets. Ensures the alarm won't be inadvertently left off! Hold period can be set for 5, 15, 30, or 60 seconds and can be extended by pressing the button again.

Nurse Call Jack lets you plug the patient's nurse-call cord into the patient alarm unit. When the alarm is triggered, the unit sends a signal to the nurse's station, indicating a patient is in need of assistance.

Specifications

Pressure Sensor Pad Size - Bed: 30" x 11"

Pressure Sensor Pad Size - Chair: 15" x 10"

Patient Alarm Unit:

Tamper-resistant power switch

Low-battery light/tone

Battery (3 AAA, included) or AC power (12V)

Two volume setting

0, 2, 4 sec. delay settings

Remote Alarm Unit:

Magnetic or screw mount

On/Off switch

Low-Battery light/tone

Battery (4C, included) or AC power (12V)

Volume setting

1 Each / Each